Brampton Engineering 1.5″ Complete Single-Layer Blown Film Line – R&D / Pilot / Low-Volume Production
| Field | Listing Value |
|---|---|
| Asset Title | Brampton Engineering 1.5″ Complete Single-Layer Blown Film Line – R&D / Pilot / Low-Volume Production |
| Short Title | Brampton 150-24-ACE Blown Film Line |
| Manufacturer | Brampton Engineering |
| Model | 150-24-ACE |
| Serial Number | 17368-1 |
| Year | 2000 |
| Asset Type | Complete Blown Film Extrusion Line |
| Primary Category | Plastics Processing Equipment |
| Subcategory | Extrusion Equipment |
| Equipment Type | Single-Layer Blown Film Line |
| Application | R&D, pilot production, specialty film and low-volume blown-film production |
| Condition | Used |
| Operating Status | Previously installed / operational history reported; current operating condition should be verified by buyer |
| Location | Alberta, Canada |
| Asking Price | US $34,500 OBO |
| Availability | Available |
| Sale Format | Direct Sale / Make Offer |
| Asset ID | Assign Sasbid Asset Assist ID when entered into system |
Core Extruder Specifications
The manufacturer build sheet identifies the main extruder as a Brampton Engineering Model 150-24-ACE Heavy Duty Extruder with the following configuration.
| Field | Specification |
|---|---|
| Screw Diameter | 1.5 in |
| L/D Ratio | 24:1 |
| Screw Type | Compression screw |
| Screw Treatment | Colmonoy 56 hardfacing on flights |
| Screw Features | Chromium-plated root and Maddock mixing section |
| Barrel | Cast-in bi-metallic lined barrel |
| Barrel Zones | 3 temperature-control zones |
| Feed Throat | Water cooled |
| Max Screw Speed | 155 RPM |
| Main Drive | 20 HP |
| Drive Manufacturer | Allen-Bradley |
| Drive Type | IMPACT field-oriented control AC drive |
| Electrical | 480 V / 3 Phase / 60 Hz per equipment nameplate |
| Main Motor | 20 HP inverter-duty motor |
| Motor Voltage | 460 V |
| Motor Speed | Approx. 1,755 RPM at 60 Hz |
| Gearbox | Zambello gearbox |
| Gearbox Year | 2000 |
The machine nameplate shown in your photo identifies Model 150-24-AC, serial 17368-1, date FEB/00, 480V / 3PH / 60Hz. Because the build sheet calls the complete extruder 150-24-ACE, I would use 150-24-ACE for the listing but retain a note that the equipment nameplate reads 150-24-AC.
Blown Film Die
The build sheet confirms a Brampton single-layer stationary blown-film die.
| Field | Specification |
|---|---|
| Die Type | Single-layer stationary blown-film die |
| Die Diameter | 3 in |
| Feed Design | Bottom-fed spiral die |
| Die Material | 4340 machine steel |
| Material Treatment | Electroless nickel plated |
| Die Heating Zones | 2 external zones |
| Die Voltage | 480 V / 1 Phase / 60 Hz |
| Die Carriage | Steel-wheel carriage with leveling bolts |
Air Ring & Cooling System
| Field | Specification |
|---|---|
| Air Ring | Brampton Engineering dual-lip air ring |
| Air Ring Model | Uni-Flo UFO4E |
| Die Compatibility | 3 in diameter die |
| Air Ring Material | Heat-treated aluminum |
| Blower Motor | 3 HP |
| Blower Capacity | Approx. 500 CFM at 26 in. water |
| Cooling Coil | Brampton Model CC500-3 |
| Cooling Coil Construction | Stainless-steel outer shell |
| Temperature Regulation | Automatic 3-way valve with manual bypass |
These items are specifically documented in the build sheet.
Control System
| Field | Specification |
|---|---|
| Control Panel | Free-standing extruder control panel |
| Panel Rating | NEMA 12 |
| Main Drive Control | Allen-Bradley |
| Barrel Temperature Control | 3-position self-tuning controllers |
| Instrumentation | Digital screw RPM meter |
| Motor-load meter | |
| Melt-temperature readout | |
| Melt-pressure indicator | |
| Line-speed indicator | |
| Cold Start Protection | Included |
| Drive Protection | Harmonic suppression / line reactor provisions |
The control system and instrumentation are detailed on the manufacturer build sheet.
Tower / Top Nip Assembly
| Field | Specification |
|---|---|
| Top Nip Type | Stationary blown-film top nip assembly |
| Nip Rolls | Two rolls |
| Roll Width | 24 in |
| Roll Diameter | 6 in |
| Nip Configuration | One pneumatic neoprene-covered roll + one fixed chrome-steel roll |
| Collapsing Frame | Approx. 24 in wide × 36 in long |
| Nip Height | Approx. 9 ft above floor |
| Tower Ceiling Requirement | Build sheet references 125 in tower-area ceiling height |
| Tower Construction | Square steel tubing |
| Access | Ladder |
Winder
| Field | Specification |
|---|---|
| Type | Brampton cantilever winder |
| Maximum Film/Core Width | 24 in |
| Maximum Finished Roll Diameter | 20 in |
| Core Shafts | Two 3-in pneumatic shafts |
| Roll Transfer | Power indexing |
| Lay-On Roll | Pneumatically adjustable |
| Footage Counter | Dual set-point |
| Drive | Torque motor / pneumatic clutch arrangement |
Approximate Physical / Shipping Information
Based on the footprint sketch and transport layout you supplied:
| Field | Approximate Value |
|---|---|
| Complete Line Shipping Configuration | Can be broken down into major modules |
| Major Modules | Winder, control panel, blower/cooling, extruder/die assembly, tower/top-nip assembly |
| Trailer Type | 48-ft flatbed configuration shown |
| Approx. Shipping Weight | 10,000–13,000 lb |
| Approx. Loaded Length | 28–32 ft |
| Approx. Loaded Width | Within 8 ft 6 in transport width in supplied configuration |
| Approx. Loaded Height | 5 ft 6 in–6 ft with tower/top nip laid down |
Included Equipment
I would make this section very prominent:
Complete system includes:
- Brampton 1.5″ heavy-duty extruder
- 20 HP main drive
- Free-standing control panel
- Single-layer 3″ blown-film die
- Dual-lip air ring
- Air-ring blower
- Cooling system
- Die block/carriage
- Blown-film tower
- Top nip / collapsing-frame assembly
- Idler rollers
- Cantilever winder
- Associated controls and instrumentation
Short Marketing Description
Complete Brampton Engineering single-layer blown-film extrusion line suitable for R&D, pilot-scale development, specialty film applications and low-volume production.
The system features a 1.5″ 24:1 L/D heavy-duty extruder with 20 HP Allen-Bradley drive, 3″ stationary blown-film die, dual-lip air ring, blower/cooling system, blown-film tower and top nip assembly, controls and cantilever winder.
Located in Alberta, Canada and available for relocation.
Sasbid can assist with loading, transportation and international logistics.
Full Listing Description
Brampton Engineering 1.5″ Complete Single-Layer Blown Film Line
Sasbid North America is offering a complete Brampton Engineering single-layer blown-film extrusion system located in Alberta, Canada.
The system is centered around a Brampton Model 150-24-ACE heavy-duty 1.5″ extruder featuring a 24:1 L/D compression screw, 20 HP Allen-Bradley AC drive, three-zone barrel temperature control and water-cooled feed throat.
The package includes the extruder, free-standing control system, 3″ stationary spiral blown-film die, dual-lip air ring, air-ring blower and cooling system, blown-film tower/top nip assembly, idler rollers and cantilever winder.
With its compact configuration and complete downstream package, the line may be well suited for polymer development, materials R&D, university or corporate laboratories, pilot production, specialty-film development and low-volume commercial film production.
The equipment can be broken down for transportation, and a complete flatbed loading configuration has already been developed.
Located: Alberta, Canada
Price: US $34,500 OBO
Availability: Immediate
International buyers welcome.
Sasbid can assist with loading, freight coordination and international transportation.
Contact Sasbid for additional specifications, inspection arrangements, freight assistance or to submit an offer.
Suggested Buyer Applications
Use these as searchable applications/tags:
- Blown film manufacturing
- LDPE film
- LLDPE film
- HDPE film
- Flexible packaging
- Polymer research
- Plastic film development
- Materials R&D
- Pilot extrusion
- Specialty film
- Prototype packaging
- Short-run film production
- Plastic bag manufacturing
- Research laboratories
- University polymer laboratories
SEO Fields
SEO Page Title
Brampton 150-24-ACE 1.5″ Complete Blown Film Line for Sale | Sasbid
Meta Description
Complete Brampton Engineering 1.5″ single-layer blown film extrusion line with extruder, 3″ die, air ring, tower, controls and winder. Located Alberta, Canada. $34,500 OBO.
URL Slug
brampton-150-24-ace-complete-blown-film-line
Search Keywords / Tags
Brampton extruder, Brampton blown film line, 150-24-ACE, used blown film line, 1.5 inch extruder, single layer blown film line, pilot blown film line, laboratory blown film extruder, plastic extrusion equipment, film extrusion line, plastics machinery Alberta
Website CTA Buttons
I would give the WordPress page five clear actions:
Request Full Specifications
Make an Offer
Schedule an Inspection
Request Freight Quote
Ask a Question
Eventually those should feed directly into GHL, with the Brampton asset ID automatically attached to the buyer inquiry.
Asset Assist Marketing Classification
When this enters Asset Assist, I’d give it:
Primary Classification:Plastics Processing → Extrusion → Blown Film Lines → Single Layer
AI Buyer Segments:
- Flexible-film manufacturers
- Polyethylene film producers
- Specialty film manufacturers
- Packaging manufacturers
- Polymer R&D laboratories
- University polymer/materials programs
- Resin manufacturers
- Plastics machinery dealers
- Extrusion equipment rebuilders
- International plastics-equipment buyers
Marketing priority: High
Recommended first markets: Canada, United States and Mexico, followed by broader Latin America and international plastics markets.
